●Outline structure:（Unit: mm）

●Specification

Construction condition
Diaphragm material	SS 316L
Housing material	Stainless steel
Pin Wire	100mm silicone rubber wire
Back pressure tube	SS 316L (only gauge and negative pressure)
Electrical Condition
Power supply	≤2.0mA DC
Impedance input	2.5kΩ~5kΩ
Impedance output	2.5kΩ~5kΩ
Response	(10%～90%):<1ms
Insulation resistance	100MΩ,100VDC
Overpressure	2times FS, ( 0C/0B/0A/02 5times FS)
Environmental Condition
Media applicability	Fluid which has no corrosion on stainless steel and nitrile rubber
Shock	No change at 10gRMS，(20～2000)Hz
Impact	100g，11ms
Position effects	Deviate 90° from any direction, zero change≤±0.05%FS
Basic Condition
Environment temperature	（25±1）℃
Humidity	（50%±10%）RH
Atmospheric pressure	(86~106) kPa
Power supply	（1.5±0.0015）mA  DC
All tests are in accordance with relevant national standards, including GB / T2423-2008, GB / T8170-2008, GJB150.17A-2009, etc., and also comply with the Company's "Pressure Sensor Enterprise Standards" provisions of the relevant content.

●Electrical connection

Electrical definition	Wire color
+OUT	Red
－OUT	Blue
－IN	Yellow
+IN	Black

●Parameter

Item	Min.	Typ.	Max.	Units
Linearity		±0.2	±0.25	%FS,BFSL
Repeatability		±0.05	±0.075	%FS
Hysteresis		±0.05	±0.075	%FS
Zero output			±2.0	mV DC
FS output	45	100		mV DC
Compensated temp. range	0~70			℃
Working temp. range	-40~125			℃
Storage temp. range	-55~150			℃
Zero temp. error		±0.75	±1.0	%FS,@25℃
Full temp. error		±0.75	±1.0	%FS,@ 25℃
Long term stability error		±0.2		%FS/year
Note：1. The above performance indicators are tested under the benchmark conditions 2. The temperature range for temperature drift test is the compensation temperature range