SMP2200 flush diaphragm pressure sensor core_Xian Sensors limited company

HOME > PRODUCT > Pressure sensor core

Pressure sensor core

SMP2200 flush diaphragm pressure sensor corePageviews: 728 times

  • ●Features
    Range: -100kPa…0kPa~20kPa…35MPa
    Wide temperature compensation 0℃~70℃
    2 times overload pressure
    SS 316L
    ●Application
    Food, beverage, health industry
    Process control
    Viscous media pressure measurement

 ●Outline Structure:(Unit: mm)

●Specification


Structural Condition 

Rear thread

M24*1 Internal thread

Housing/Diaphragm material

SS 316L

Pin Wire

Gold-plated karaf/100mm silicone rubber wire

Back pressure tube

SS 316L (gauge and negative pressure only)

Seal ring

Nitrile rubber

Electrical Condition

Power supply

≤2.0mADC

Impedance input

3kΩ6kΩ

Impedance output

4kΩ6kΩ

Response

(10%90%):<1ms

Insulation resistance

100MΩ,100V DC

Overpressure

2times FS, 5times for 0B/0A/02

Environmental Condition

Media applicability

Fluid which has no corrosion on stainless steel and nitrile rubber

Shock

No change at 10gRMS(202000)Hz

Impact

100g, 11ms

Location effects

Deviate 90° from any direction, zero change≤±0.05%FS

Basic Condition

Environment temperature

25±1)℃

Humidity

50%±10%RH

Atmospheric pressure

(86~106) KPa

Power supply

1.5±0.0015mA  DC

All tests are in accordance with relevant national standards, including GB / T2423-2008, GB / T8170-2008, GJB150.17A-2009, etc., and also comply with the Company's "Pressure Sensor Enterprise Standards" provisions of the relevant content.

●Parameter


Item

Min.

Typ.

Max.

Units

Linearity

±0.15

±0.2

%FS,BFSL

Repeatability

±0.05

±0.075

%FS

Hysteresis

±0.05

±0.075

%FS

Zero output

 

 

±2.0

mV DC

FS output

45

130

mV DC

Compensated temp. range

070 (0A/0B  0~60)

Working temp. range

-40125

Storage temp. range

-55150

Zero temp. error

±0.75

±1.0

%FS, @25

Full temp. error

 

±0.75

±1.0

%FS, @ 25

Long term stability error

 

±0.1

 

%FS/year

Note1. The above performance indicators are tested under the benchmark conditions.

      2. The temperature range for temperature drift test is the compensation temperature range.



● Electrical connection


Pin

Electric connection

Wire color

4

+IN

Black

5

OUT

Blue

11

+OUT

Red

12

IN

Yellow